Bubble Counter - Regulator Type - Manual

Step 1 | Filling With Water

Open top part of the bubble counter
Take supplied O-ring out of the bubble counter chamber
Fill the chamber with water*
*We do not recommend mineral oil as it may contaminate your diffuser.


Step 2 | Compression Collars


Remove the compression collar
Feed tubing through the collar


Step 3 | Connecting Tubing



Push the tubing onto the nipples at each end of the bubble counter


Step 4 | Installing O-ring


Install supplied O-ring on the nipple of the needle valve


Step 5 | Installing Bubble Counter




Screw bubble counter onto the needle valve. Tighten firmly to ensure an air-tight seal*
*Check for leaks using soap/water mix once the system is operational.


Contact Us

Not finding what you're looking for? Contact Us Directly